<!DOCTYPE svcdoc PUBLIC "-//MATSUSHITA//DTD SVCDOC.DTD V2.0//EN" [
<!-- Begin Document Specific Declarations -->
<!ENTITY mttl1 SYSTEM "ser_ma.tif" NDATA TIF>
<!ENTITY logo1 SYSTEM "suple.tif" NDATA TIF>
<!ENTITY graphic1 SYSTEM "warning.tif" NDATA TIF>
<!ENTITY bnm2 SYSTEM "pana.tif" NDATA TIF>
<!ENTITY graphic2 SYSTEM "oi2.tif" NDATA TIF>
<!ENTITY graphic3 SYSTEM "fuse.tif" NDATA TIF>
<!ENTITY graphic4 SYSTEM "schcdser.pdf" NDATA pdf>
<!ENTITY graphic5 SYSTEM "schmain.pdf" NDATA pdf>
<!ENTITY graphic6 SYSTEM "schtuner.pdf" NDATA pdf>
<!ENTITY graphic7 SYSTEM "schdeck.pdf" NDATA pdf>
<!ENTITY graphic8 SYSTEM "cord.tif" NDATA TIF>
<!-- End Document Specific Declarations -->
]>
<svcdoc type = "sup" lang = "english">
<cvr>
<mid>
<ono>Order No. MD0104076S1</ono>
<cno>J1</cno>
<mttl loc = "mttl1" halign = "left">
</mid>
<pid>
<product>
<pnm>Portable Stereo CD System</pnm>
<logo loc = "logo1">
<mdlno>
<mmdlno>RX-D12</mmdlno>
</mdlno>
</product>
<chss>Color</chss>
<clr>(A) ... Blue Type</clr>
<dest>
</dest>
<dest>P ... U.S.A. </dest>
<dest>
</dest>
<dest>Tape Deck: SG20 Mechanism Series</dest>
<dest>Traverse Deck: RAE0152Z-1C Mechanism Series</dest>
<dest>
</dest>
</pid>
<subject>Change the Version (A6) to (J1) (Correction)</subject>
<notice>
Please delete the RX-D12(P) (A6) version (Order No. MD0103042C1) and use this supplement manual (J1) version.</notice>
<pspec>
<spec>
<table frame = "none" colsep = "0" rowsep = "0">
<tgroup cols = "2" colsep = "0" rowsep = "0">
<colspec colnum = "1" colname = "1" colwidth = "1.742in" colsep = "0">
<colspec colnum = "2" colname = "2" colwidth = "1.742in" colsep = "0">
<tbody>
<row rowsep = "0">
<entry colname = "1" align = "left">
<p>
<emp>&block; RADIO</emp>
</p>
</entry>
<entry colname = "2" align = "right">
</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Frequency Range</entry>
<entry colname = "2" align = "right">
</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">FM</entry>
<entry colname = "2" align = "right">87.9-107.9 MHz (200 kHz steps)</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">
</entry>
<entry colname = "2" align = "right">87.5-108.0 MHz (100 kHz steps)</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">AM</entry>
<entry colname = "2" align = "right">520-1710 kHz (10 kHz steps)</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Intermediate Frequency</entry>
<entry colname = "2" align = "right">
</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">AM</entry>
<entry colname = "2" align = "right">450 kHz</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">FM</entry>
<entry colname = "2" align = "right">10.7 MHz</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Sensitivity</entry>
<entry colname = "2" align = "right">
</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">AM</entry>
<entry colname = "2" align = "right">46 dB&sol;m&sol;50 mW</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">FM</entry>
<entry colname = "2" align = "right">15 dB&sol;50 mW</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">
</entry>
<entry colname = "2" align = "left">
</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">
<p>
<emp>&block; TAPE RECORDER</emp>
</p>
</entry>
<entry colname = "2" align = "right">
</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Track System</entry>
<entry colname = "2" align = "right">4 track, 2 channel, stereo</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Monitor system</entry>
<entry colname = "2" align = "right">Variable sound monitor</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Recording system</entry>
<entry colname = "2" align = "right">AC bias</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Erasing system</entry>
<entry colname = "2" align = "right">Multi pole magnet</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Frequency range</entry>
<entry colname = "2" align = "right">
</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Normal position</entry>
<entry colname = "2" align = "right">50 ~ 12000 Hz</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">
</entry>
<entry colname = "2" align = "right">
</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">
<p>
<emp>&block; CD PLAYER</emp>
</p>
</entry>
<entry colname = "2" align = "right">
</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Sampling frequency</entry>
<entry colname = "2" align = "right">44.1 kHz</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Decoding</entry>
<entry colname = "2" align = "right">16 bit linear</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Beam source</entry>
<entry colname = "2" align = "right">Semiconductor laser (wavelength 780 nm)</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">No. of channels</entry>
<entry colname = "2" align = "right">2 channel, stereo</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Wow and flutter</entry>
<entry colname = "2" align = "right">Less than possible measurement data</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">D&sol;A converter</entry>
<entry colname = "2" align = "right"> (1 bit DAC)</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">
</entry>
<entry colname = "2" align = "right">
</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">
<p>
<emp>&block; GENERAL</emp>
</p>
</entry>
<entry colname = "2" align = "right">
</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Power Requirement</entry>
<entry colname = "2" align = "right">
</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">AC</entry>
<entry colname = "2" align = "right">120 V, 60 Hz</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">
</entry>
<entry colname = "2" align = "right">Power Consumption : 14 W</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Battery</entry>
<entry colname = "2" align = "right">9 V (Six R20&sol;LR20, D, UM-1 batteries) </entry>
</row>
<row rowsep = "0">
<entry namest = "1" nameend = "2" align = "right">&bull; Do not use rechargeable type batteries.</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Memory back-up</entry>
<entry colname = "2" align = "right">6 V (Four R6&sol;LR6, AA, UM-3 batteries)</entry>
</row>
<row rowsep = "0">
<entry namest = "1" nameend = "2" align = "right">&bull; Do not use rechargeable type batteries.</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Speakers</entry>
<entry colname = "2" align = "right">10 cm (3-15&sol;16&rdquo;) 4&ohm; x 2</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Jacks</entry>
<entry colname = "2" align = "right">
</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Output</entry>
<entry colname = "2" align = "right">Phones : 3.5 mm stereo (32&ohm;)</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Dimensions (W x H x D)</entry>
<entry colname = "2" align = "right">420 x 167 x 275 mm</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "right">
</entry>
<entry colname = "2" align = "right">(16-17&sol;32&rdquo; x 6-31&sol;32&rdquo; x 10-13&sol;16&rdquo;)</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">Mass</entry>
<entry colname = "2" align = "right">3.4 kg (7 lb. 8 oz.) without batteries</entry>
</row>
<row rowsep = "0">
<entry namest = "1" nameend = "2" align = "justify">Power consumption in standby mode : 1 W</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "justify">
</entry>
<entry colname = "2" align = "right">
</entry>
</row>
<row rowsep = "0">
<entry namest = "1" nameend = "2" align = "left">Notes:<ol>
<li>
<p>Specifications are subject to change without notice.</p>
</li>
<li>
<p>Mass and dimensions are approximate.</p>
</li>
</ol>
</entry>
</row>
</tbody>
</tgroup>
</table>
</spec>
</pspec>
<legal>
<cpyrht>&copy; 2001 Matsushita Electronics (S) Pte. Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law.</cpyrht>
<warn>
<graphic loc = "graphic1" sizex = "183.000mm" sizey = "21.406mm">
</warn>
</legal>
<bnm loc = "bnm2">
<toc>
</cvr>
<text>
<ti1 column = "3" newcol = "1">
<ttl>Controls</ttl>
<fig>
<graphic loc = "graphic2" sizex = "95.673mm" sizey = "203.557mm">
</fig>
<p>
</p>
<p>
<emp>Battery Service Life</emp>
</p>
<p>UM-1 (D-size) Batteries<br>Approximately 30 hrs of Tape Recording. (EIAJ)<br>Approximately 16 hrs of Tape Playback. (EIAJ)<br>Approximately 11.5 hrs of CD Recording. (EIAJ)<br>Approximately 10.5 hrs of CD Playback. (EIAJ)</p>
<p>
</p>
<p>The battery service life is measured according to the conditions set forth by EIAJ. (Electronic Industries Association of Japan). As the battery service life varies with the method of operation and environmental conditions, use these values as reference.</p>
</ti1>
<ti1 column = "2" newcol = "1">
<ttl>Schematic Diagram Note</ttl>
<p>(All schematic diagrams may be modified at any time with the development of new technology.)</p>
<p>Notes:</p>
<table frame = "none" colsep = "0" rowsep = "0">
<tgroup cols = "2" colsep = "0" rowsep = "0">
<colspec colnum = "1" colname = "1" colwidth = "0.652in" colsep = "0">
<colspec colnum = "2" colname = "2" colwidth = "2.344in" colsep = "0">
<tbody>
<row rowsep = "0">
<entry colname = "1" align = "left">S702</entry>
<entry colname = "2" align = "left">Interlock Switch</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">S703</entry>
<entry colname = "2" align = "left">Rest Switch</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">SW302</entry>
<entry colname = "2" align = "left">Function Switch</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">SW601</entry>
<entry colname = "2" align = "left">Auto Scan Switch</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">SW602</entry>
<entry colname = "2" align = "left">XBS&sol;TONE&sol;HES Switch</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">SW603</entry>
<entry colname = "2" align = "left">Play Mode Switch</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">SW604</entry>
<entry colname = "2" align = "left">Memory Switch</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">SW605</entry>
<entry colname = "2" align = "left">REV Skip Switch</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">SW606</entry>
<entry colname = "2" align = "left">FWD Skip Switch</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">SW607</entry>
<entry colname = "2" align = "left">Play&sol;Pause Switch</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">SW608</entry>
<entry colname = "2" align = "left">CD Stop Switch</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">SW1001</entry>
<entry colname = "2" align = "left">Push Switch</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "left">SW1002</entry>
<entry colname = "2" align = "left">Leaf Switch</entry>
</row>
</tbody>
</tgroup>
</table>
<p>
</p>
<p>
<emp>Battery Current:</emp>
</p>
<p>Volume minimum :</p>
<p>119 mA (FM)</p>
<p>112 mA (AM)</p>
<p>187 mA (TAPE Playback)</p>
<p>169 mA (CD REC)</p>
<p>
</p>
<p>Volume maximum :</p>
<p>119 mA (FM)</p>
<p>112 mA (AM)</p>
<p>187 mA (FM RADIO REC)</p>
<p>181 mA (AM RADIO REC)</p>
<p>187 mA (TAPE Playback)</p>
<p>238 mA (CD REC)</p>
<p>
</p>
<p>
</p>
<ul>
<li>
<p>The voltage value and waveforms are the reference voltage of this unit measured by DC electronic voltmeter (high impedance) and oscilloscope on the basis of chassis. Accordingly, there may arise some error in voltage values and waveforms
depending upon the internal impedance of the tester or the measuring unit.</p>
<table frame = "none" colsep = "0" rowsep = "0">
<tgroup cols = "4" colsep = "0" rowsep = "0">
<colspec colnum = "1" colname = "1" colwidth = "0.787in" colsep = "0">
<colspec colnum = "2" colname = "2" colwidth = "0.999in" colsep = "0">
<colspec colnum = "3" colname = "3" colwidth = "0.908in" colsep = "0">
<colspec colnum = "4" colname = "4" colwidth = "0.862in" colsep = "0">
<tbody>
<row rowsep = "0">
<entry colname = "1" align = "justify">No mark</entry>
<entry colname = "2" align = "justify">...Playback</entry>
<entry colname = "3" align = "justify">&lt;      &gt;</entry>
<entry colname = "4" align = "justify">...FM</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "justify">((       ))</entry>
<entry colname = "2" align = "justify">...CD</entry>
<entry colname = "3" align = "justify">(     )</entry>
<entry colname = "4" align = "justify">...AM</entry>
</row>
</tbody>
</tgroup>
</table>
</li>
</ul>
<p>
</p>
<ul>
<li>
<p>
<emp>Importance safety notice:</emp>
</p>
<p>Components identifed by &safety; mark have special characteristics important for safety. Furthermore, special parts which have purposes of fire-retardant (resistors), high-quality sound (capacitors), low-noise (resistors), etc. are used. When
replacing any of components, be sure to use only manufacturer&rsquo;s specified parts shown in the parts list.</p>
</li>
</ul>
<p>
</p>
<caution>
<ttl>Caution!</ttl>
<p>IC, LSI and VLSI are sensitive to static electricity.</p>
<p>Secondary trouble can be prevented by taking care during repair.</p>
<ul>
<li>
<p>Cover the parts boxes made of plastics with aluminium foil.</p>
</li>
<li>
<p>Put a conductive mat on the work table.</p>
</li>
<li>
<p>Ground the soldering iron.</p>
</li>
<li>
<p>Do not touch the pins of IC, LSI or VLSI with fingers directly.</p>
</li>
</ul>
<p>
</p>
</caution>
<fig>
<graphic loc = "graphic3" sizex = "67.860mm" sizey = "35.984mm">
</fig>
</ti1>
<ti1 newpage = "1">
<ttl>Schematic Diagram</ttl>
<fig column = "2" type = "ext">
<graphic loc = "graphic4" sizex = "180.250mm" sizey = "249.824mm">
</fig>
<fig column = "2" type = "ext">
<graphic loc = "graphic5" sizex = "182.500mm" sizey = "252.942mm">
</fig>
<fig column = "2" type = "ext">
<graphic loc = "graphic6" sizex = "183.000mm" sizey = "252.942mm">
</fig>
<fig column = "2" type = "ext">
<graphic loc = "graphic7" sizex = "185.914mm" sizey = "252.942mm">
</fig>
</ti1>
<ti1 column = "2" newpage = "1">
<ttl>Parts Location and Replacement Parts List</ttl>
<p>Notes:</p>
<ul column = "2">
<li>
<p>The parenthesized indications in the Remarks column specify the areas or color. (Refer to the cover page for area or color.)</p>
<p>Parts without these indications can be used for all areas.</p>
</li>
<li>
<p>[M] indicates in the Remarks columns indicates parts that are supplied by <emp>MESA</emp>.</p>
</li>
<li>
<p>The &ldquo;(SF)&rdquo; mark denotes the standard part.</p>
</li>
<li>
<p>Reference for O&sol;I book languages are as follows : </p>
<table frame = "none" colsep = "0" rowsep = "0">
<tgroup cols = "4" colsep = "0" rowsep = "0">
<colspec colnum = "1" colname = "1" colwidth = "1.742in" colsep = "0">
<colspec colnum = "2" colname = "2" colwidth = "1.742in" colsep = "0">
<colspec colnum = "3" colname = "3" colwidth = "1.742in" colsep = "0">
<colspec colnum = "4" colname = "4" colwidth = "1.742in" colsep = "0">
<tbody>
<row rowsep = "0">
<entry colname = "1" align = "justify">Ar : Arabic</entry>
<entry colname = "2" align = "justify">Cf : Canadian French</entry>
<entry colname = "3" align = "justify">Cz : Czech</entry>
<entry colname = "4" align = "justify">Da : Danish</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "justify">Du : Dutch</entry>
<entry colname = "2" align = "justify">En : English</entry>
<entry colname = "3" align = "justify">Fr : French</entry>
<entry colname = "4" align = "justify">Ge : German</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "justify">It : Italian</entry>
<entry colname = "2" align = "justify">Ko : Korean</entry>
<entry colname = "3" align = "justify">Po : Polish</entry>
<entry colname = "4" align = "justify">Ru : Russian</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "justify">Sp : Spanish</entry>
<entry colname = "2" align = "justify">Sw : Swedish</entry>
<entry colname = "3" align = "justify">Co : Traditional Chinese</entry>
<entry colname = "4" align = "justify">Cn : Simplified Chinese</entry>
</row>
</tbody>
</tgroup>
</table>
</li>
</ul>
<p>
</p>
<ti2 column = "2">
<ttl>Accessories Parts List</ttl>
<table frame = "all" colsep = "1" rowsep = "1" type = "parts">
<tgroup cols = "4" colsep = "1" rowsep = "1">
<colspec colnum = "1" colname = "1" colwidth = "41*">
<colspec colnum = "2" colname = "2" colwidth = "56*">
<colspec colnum = "3" colname = "3" colwidth = "119*">
<colspec colnum = "4" colname = "4" colwidth = "33*">
<thead>
<row rowsep = "1">
<entry colname = "1" align = "center" type = "rno">
<p>Ref. No.</p>
</entry>
<entry colname = "2" align = "center" type = "pno">
<p>Part No.</p>
</entry>
<entry colname = "3" align = "center" type = "pnm">
<p>Part Name &amp; Description</p>
</entry>
<entry colname = "4" align = "center">
<p>Remarks</p>
</entry>
</row>
</thead>
<tbody>
<row rowsep = "1">
<entry colname = "1" align = "justify" type = "rno">
<p>
</p>
</entry>
<entry colname = "2" align = "justify" type = "pno">
<p>
</p>
</entry>
<entry colname = "3" align = "justify" type = "pnm">
<p>ACCESSORIES</p>
</entry>
<entry colname = "4" align = "justify">
<p>
</p>
</entry>
</row>
<row rowsep = "1">
<entry colname = "1" align = "justify" type = "rno">
<p>
</p>
</entry>
<entry colname = "2" align = "justify" type = "pno">
<p>
</p>
</entry>
<entry colname = "3" align = "justify" type = "pnm">
<p>
</p>
</entry>
<entry colname = "4" align = "justify">
<p>
</p>
</entry>
</row>
<row rowsep = "1">
<entry colname = "1" align = "justify" type = "rno">
<p>A1</p>
</entry>
<entry colname = "2" align = "justify" type = "pno">
<p>RJA0065-1D</p>
</entry>
<entry colname = "3" align = "justify" type = "pnm">
<p>AC CORD</p>
</entry>
<entry colname = "4" align = "justify">
<p>[M]&safety;</p>
</entry>
</row>
<row rowsep = "0">
<entry colname = "1" align = "justify" type = "rno">
<p>A2</p>
</entry>
<entry colname = "2" align = "justify" type = "pno">
<p>RQT5685-1P</p>
</entry>
<entry colname = "3" align = "justify" type = "pnm">
<p>O&sol;I BOOK (En)</p>
</entry>
<entry colname = "4" align = "justify">
<p>[M]</p>
</entry>
</row>
</tbody>
</tgroup>
</table>
<p>
</p>
<fig>
<cap>AC power cord.... 1 pc</cap>
<graphic loc = "graphic8" sizex = "37.423mm" sizey = "21.463mm">
</fig>
</ti2>
</ti1>
</text>
<bm><backcover><br>Printed in Singapore<br>M010400001FLE&sol;E</backcover>
</bm>
</svcdoc>
